Boa tarde senhores,
Fazem alguns dias que ando pesquisando para saber se o endian 2.4 tem suporte a placa de rede Agere Systems ET-131-X Gigabit Ethernet Adapter, módulo et131x.
E até agora não encontrei nenhuma resposta e não tenho ideia onde encontrar .rpm e muito menos como compilar os drivers no endian.
Se alguém tiver alguma ideia do que eu possa fazer, fico grato.
Galera, consegui achar uma documentação onde explicar como compilar driver no endian.
Este http://blog.luizagostinho.com/?p=596 é o link.
Sendo que o driver et131x não está compilando se alguém já conseguiu compilar, favor informar onde encontro o driver e patch correto.
É, consegui achar o driver correto e que compila, também no mesmo local/blog.
http://blog.luizagostinho.com/?s=et131x
O problema agora está em achar o kernel correto para poder complicar.
Fica a dica ai pra quem tiver interesse.
As placas com chipset: Agere Systems ET-131x PCI-E Ethernet Controller, não tem suporte no endian, foi necessário compilar o driver específico para a mesma. Os procedimentos abaixo dão suporte necessário para fazer a compilação do driver.
Dar acesso a internet ao Endian:
# route add default fw 192.168.0.100
Atualizar o Endian e mudar de repositório:
# efw-upgrade
# efw-upgrade -s
Escolha development, digite seu e-mail. Reboot!
Agora utilizando o smart para instalar o kernel-PAE, já que não consegui achar o kernel padrão para desenvolvimento.
O kernel PAE dá suporte a mais de 4GB de ram, de acordo com informações encontradas na internet.
# smart install kernel-PAE
Após executar este comando, ele irá remover o kernel padrão e algumas dependências e instalar o kernel PAE e as dependências necessárias, que são iguais a do kernel padrão.
Reboot!
Se iniciou normalmente, agora, faça um upgrade usando o efw-upgrade ou smart upgrade.
Agora vamos iniciar o processo de instalação dos pacotes necessários para compilação do driver.
Primeiro, baixar os pacotes/fontes do Endian 2.4 Community.
Vamos instalar alguns pacotes para nos ajudar nessa tarefa:
# rpm -Uvh http://archives.fedoraproject.org/pub/archive/fedora/linux/core/3/i386/os/Fedora/RPMS/info-4.7-5.i386.rpm
# rpm -Uvh http://archives.fedoraproject.org/pub/archive/fedora/linux/core/3/i386/os/Fedora/RPMS/wget-1.9.1-17.i386.rpm
Agora vamos baixar e descompactar os pacotes para permitir a compilação do driver:
# wget http://sourceforge.net/projects/efw/files/Development/EFW-2.4-RESPIN/EFW-COMMUNITY-2.4-devel-srpms.tar.gz/download
# tar -xvzf EFW-COMMUNITY-2.4-devel-srpms.tar.gz
Instalamos os pacotes necessários para a compilação:
# cd EFW-COMMUNITY-2.4-201006071652/RPMS/
# rpm -Uvh binutils-2.15.92.0.2-25.endian2.i586.rpm glibc-kernheaders-2.4-9.1.103.EL.endian1.i586.rpm patch-2.5.4-20.endian0.i586.rpm glibc-headers-2.3.4-2.41.endian8.i386.rpm glibc-extras-2.3.4-2.41.endian8.i386.rpm glibc-devel-2.3.4-2.41.endian8.i386.rpm libgomp-4.1.2-14.endian1.i586.rpm gcc4-4.1.2-14.endian1.i586.rpm make-3.81-3.endian0.i586.rpm cpp-3.4.6-10.endian8.i586.rpm autoconf-2.59-7.endian0.noarch.rpm automake-1.9.5-0.endian0.noarch.rpm m4-1.4.3-0.endian0.i386.rpm rpm-build-4.4.2.3-9.endian3.i586.rpm libstdc++-devel-3.4.6-10.endian8.i586.rpm
OBS.: A instalação do rpmbuild é apenas para manter a compatibilidade com o Endian, caso você queria gerar um .rpm do driver se o mesmo estiver conforme as exigências para criação do .rpm.
Criamos um link do gcc apontando para o gcc4:
# ln -s /usr/bin/gcc4 /usr/bin/gcc
Agora vamos trabalhar a compilação do driver, primeiro baixando o driver direto do sourceforge:
Descompactar e compilar o driver:
# tar -xvzf et131x-1.2.3-3.tar.gz
# cd et131x-1.2.3-3/
# make
Caso não apresente nenhum erro durante a compilação, instale o módulo no sistema:
# make modules_install
Carregue o módulo no sistema:
# gzip et131x.ko
# cp et131x.ko.gz /lib/modules/2.6.27.19-72.e25PAE/kernel/drivers/net/
# gunzip et131x.ko.gz
# insmod et131x.ko
Verifique com o comando dmesg e veja se driver foi carregado:
# dmesg
et131x: module license 'BSD' taints kernel.
10/100/1000 Base-T Ethernet Driver for the ET1310, v1.2.3 01/31/2006 15:40:00 by Agere Systems, http://www.agere.com
et131x 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
et131x 0000:01:00.0: setting latency timer to 64
# ifconfig eth1 up
Pronto! O dispositivo já devem aparecer na interface web!
Os Links utilizados como solução para a compilação do driver, foram:
http://blog.luizagostinho.com/?p=596
http://blog.luizagostinho.com/?p=733
http://efwsupport.com/index.php?topic=610
http://efwsupport.com/index.php?topic=1155.0
http://efwsupport.com/index.php?topic=1988.0
http://www.efwsupport.com/index.php?topic=628.0
moso
Membro
Olá skate_forever! :)
Estou tentando fazer a mesma coisa no Endian 2.4.1 mas parece que faltam alguns arquivos no EFW-COMMUNITY-2.4.1-devel-srpm-rpms.tar.gz disponível para download... :P
Fui tentar instalar o que tinha porém ao executar:
rpm -Uhv binutils-2.15.92.0.2-25.endian2.i586.rpm glibc-kernheaders-2.4-9.1.103.EL.endian1.i586.rpm patch-2.5.4-20.endian0.i586.rpm libgomp-4.1.2-14.endian1.i586.rpm gcc4-4.1.2-14.endian1.i586.rpm make-3.81-3.endian0.i586.rpm cpp-3.4.6-10.endian8.i586.rpm autoconf-2.59-7.endian0.noarch.rpm automake-1.9.5-0.endian0.noarch.rpm m4-1.4.3-0.endian0.i386.rpm libstdc++-devel-3.4.6-10.endian8.i586.rpm
eu obtenho o seguinte erro:
error: Failed dependencies:
glibc-devel >= 2.2.90-12 is needed by gcc4-4.1.2-14.endian1.i586Sabes como posso conseguir fazer funcionar a
04:00.0 Ethernet controller: Agere Systems ET-131x PCI-E Ethernet Controller (rev 02)
???
[]'s
Moso, também tentei na versão 2.4.1, mas não tinha o srpm ainda.
Veja se existe algum glibc-devel dentro desses pacotes.. Se não existir, pegue da versão 2.4.0 e faça esse procedimento acima.
Fiz na 2.4.0 e funcionou tranquilamente.
moso
Membro
Olá skate_forever! :)
Tentei pegar arquivos faltantes no EFW-COMMUNITY-2.4.1-devel-srpm-rpms.tar.gz no EFW-COMMUNITY-2.4-devel-srpms.tar.gz mas deu vários erros de dependência e talz, não consegui fazer funcionar.
Você poderia me enviar o módulo compilado para 2.4 pra ver se funciona direto no 2.4.1?
Ou talvez você consiga compilar ele no 2.4.1...
[]'s
Você já tentou compilar usando a versão 2.4.0????
E quais os erros de dependência?
Colando os erros são mais fáceis de resolver.
moso
Membro
Olá skate_forever! :)
Aí vai toda informação que consegui (e até onde consegui ir)... :D
---
login as: root
root@192.168.1.254's password:
root@firewall-01:~ # efw-upgrade -s
Please choose the appropriate channel for your environment and hit [ENTER]:
1) Production (stable releases)
2) Development (bleeding edge)
2
Please enter your username and hit [ENTER]:
usuario@dominio.com.br
Updating cache... ############################# [100%]
Fetching information for 'efw-community'...
-> http://endian@supernicolini.com.br:*@updates.endian.org/devel/repodata/repomd.xml
repomd.xml ############################# [ 50%]
-> http://endian@supernicolini.com.br:*@updates.endian.org/devel/repodata/filelists.xml.gz
-> http://endian@supernicolini.com.br:*@updates.endian.org/devel/repodata/primary.xml.gz
filelists.xml.gz ############################# [ 75%]
primary.xml.gz ############################# [100%]
Updating cache... ############################# [100%]
Channels have no new packages.
Saving cache...
Loading cache...
Updating cache... ############################ [100%]
Computing transaction...
No interesting upgrades available.
/etc/upgrade/upgrade.d/migration:
---
Found: 0
OK: 0
root@firewall-01:~ # reboot
Broadcast message from root (pts/0) (Wed Nov 24 16:43:36 2010):
The system is going down for reboot NOW!---
*** primeiro problema ***
login as: root
root@192.168.1.254's password:
Last login: Wed Nov 24 16:40:19 2010 from 192.168.1.222
root@firewall-01:~ # smart install kernel-PAE
Loading cache...
Updating cache... ############################ [100%]
error: 'kernel-PAE' matches no packages. Suggestions:
error: kernel-3:2.6.32.25-57.e40@i586---
*** tentei... ***
root@firewall-01:~ # smart install kernel-3:2.6.32.25-57.e40@i586
Loading cache...
Updating cache... ####################################################################################### [100%]
warning: kernel-3:2.6.32.25-57.e40@i586 is already installed
Computing transaction...---
*** baixei os fontes do driver e dos EFW 2.4 e 2.4.1 para /root/temp ***
root@firewall-01:~ # mkdir temp
root@firewall-01:~ # cd temp
root@firewall-01:~/temp # ls -l
total 1036608
-rw-r--r-- 1 root root 515215702 Nov 23 19:16 EFW-COMMUNITY-2.4-devel-srpms.tar.gz
-rw-r--r-- 1 root root 544790494 Nov 23 16:57 EFW-COMMUNITY-2.4.1-devel-srpm-rpms.tar.gz
-rw-r--r-- 1 root root 424320 Nov 23 16:11 et131x-1.2.3-3.tar.gz---
*** descompactando os arquivos... ***
root@firewall-01:~/temp # tar zxf EFW-COMMUNITY-2.4-devel-srpms.tar.gz
root@firewall-01:~/temp # tar zxf EFW-COMMUNITY-2.4.1-devel-srpm-rpms.tar.gz
root@firewall-01:~/temp # tar zxf et131x-1.2.3-3.tar.gz
root@firewall-01:~/temp # cd EFW-COMMUNITY-2.4.1-201011120951/
root@firewall-01:~/temp/EFW-COMMUNITY-2.4.1-201011120951 # ls -l
total 240
drwxr-xr-x 2 root root 4096 Nov 12 12:25 DEVEL_RPMS
drwxr-xr-x 2 root root 20480 Nov 12 10:11 RPMS
drwxr-xr-x 2 root root 16384 Nov 12 12:38 SRPMS
-rw-r--r-- 1 root root 198759 Nov 12 12:28 installer-2.4.1.tar.gz
root@firewall-01:~/temp/EFW-COMMUNITY-2.4.1-201011120951 # cd DEVEL_RPMS/
root@firewall-01:~/temp/EFW-COMMUNITY-2.4.1-201011120951/DEVEL_RPMS # ls
autoconf-2.59-7.endian0.noarch.rpm m4-1.4.3-0.endian0.i386.rpm
automake-1.9.5-0.endian0.noarch.rpm make-3.81-3.endian0.i586.rpm
binutils-2.15.92.0.2-25.endian2.i586.rpm man-1.5o2-3.endian1.i386.rpm
bison-1.875c-2.endian0.i386.rpm nasm-0.98.38-4.endian0.i386.rpm
build-essential-0.4-endian3.i586.rpm patch-2.5.4-20.endian0.i586.rpm
cpp-3.4.6-10.endian8.i586.rpm python-setuptools-0.6c9-0.endian2.i586.rpm
flex-2.5.4a-33.endian0.i386.rpm texinfo-4.8-2.2.endian0.i386.rpm
gcc-3.4.6-10.endian8.i586.rpm libgcc-3.4.6-10.endian8.i586.rpm
gcc-c++-3.4.6-10.endian8.i586.rpm libgomp-4.1.2-14.endian1.i586.rpm
gcc4-4.1.2-14.endian1.i586.rpm libstdc++-3.4.6-10.endian8.i586.rpm
glibc-kernheaders-2.4-9.1.103.EL.endian1.i586.rpm libstdc++-devel-3.4.6-10.endian8.i586.rpm
groff-1.18.1.1-5.endian0.i386.rpm---
*** tentando instalar os pacotes... ***
root@firewall-01:~/temp/EFW-COMMUNITY-2.4.1-201011120951/DEVEL_RPMS # rpm -Uvh binutils-2.15.92.0.2-25.endian2.i586.rpm glibc-kernheaders-2.4-9.1.103.EL.endian1.i586.rpm patch-2.5.4-20.endian0.i586.rpm glibc-headers-2.3.4-2.41.endian8.i386.rpm glibc-extras-2.3.4-2.41.endian8.i386.rpm glibc-devel-2.3.4-2.41.endian8.i386.rpm libgomp-4.1.2-14.endian1.i586.rpm gcc4-4.1.2-14.endian1.i586.rpm make-3.81-3.endian0.i586.rpm cpp-3.4.6-10.endian8.i586.rpm autoconf-2.59-7.endian0.noarch.rpm automake-1.9.5-0.endian0.noarch.rpm m4-1.4.3-0.endian0.i386.rpm libstdc++-devel-3.4.6-10.endian8.i586.rpm
error: open of glibc-headers-2.3.4-2.41.endian8.i386.rpm failed: No such file or directory
error: open of glibc-extras-2.3.4-2.41.endian8.i386.rpm failed: No such file or directory
error: open of glibc-devel-2.3.4-2.41.endian8.i386.rpm failed: No such file or directory---
*** copiei dos fontes do EFW 2.4 os arquivos que faltavam... ***
root@firewall-01:~/temp # cp ./EFW-COMMUNITY-2.4-201006071652/RPMS/glibc-headers-2.3.4-2.41.endian8.i386.rpm ./EFW-COMMUNITY-2.4.1-201011120951/DEVEL_RPMS/
root@firewall-01:~/temp # cp ./EFW-COMMUNITY-2.4-201006071652/RPMS/glibc-extras-2.3.4-2.41.endian8.i386.rpm ./EFW-COMMUNITY-2.4.1-201011120951/DEVEL_RPMS/
root@firewall-01:~/temp # cp ./EFW-COMMUNITY-2.4-201006071652/RPMS/glibc-devel-2.3.4-2.41.endian8.i386.rpm ./EFW-COMMUNITY-2.4.1-201011120951/DEVEL_RPMS/---
*** novo erro... ***
root@firewall-01:~/temp/EFW-COMMUNITY-2.4.1-201011120951/DEVEL_RPMS # rpm -Uvh binutils-2.15.92.0.2-25.endian2.i586.rpm glibc-kernheaders-2.4-9.1.103.EL.endian1.i586.rpm patch-2.5.4-20.endian0.i586.rpm glibc-headers-2.3.4-2.41.endian8.i386.rpm glibc-extras-2.3.4-2.41.endian8.i386.rpm glibc-devel-2.3.4-2.41.endian8.i386.rpm libgomp-4.1.2-14.endian1.i586.rpm gcc4-4.1.2-14.endian1.i586.rpm make-3.81-3.endian0.i586.rpm cpp-3.4.6-10.endian8.i586.rpm autoconf-2.59-7.endian0.noarch.rpm automake-1.9.5-0.endian0.noarch.rpm m4-1.4.3-0.endian0.i386.rpm libstdc++-devel-3.4.6-10.endian8.i586.rpm
error: Failed dependencies:
glibc = 1:2.3.4-2.41.endian8 is needed by glibc-headers-2.3.4-2.41.endian8.i386
glibc = 1:2.3.4-2.41.endian8 is needed by glibc-devel-2.3.4-2.41.endian8.i386
root@firewall-01:~/temp/EFW-COMMUNITY-2.4.1-201011120951/DEVEL_RPMS # rpm -qa glibc
glibc-2.3.4-2.41.endian9---
*** tentei com "--nodeps"... ***
root@firewall-01:~/temp/EFW-COMMUNITY-2.4.1-201011120951/DEVEL_RPMS # rpm -Uvh binutils-2.15.92.0.2-25.endian2.i586.rpm glibc-kernheaders-2.4-9.1.103.EL.endian1.i586.rpm patch-2.5.4-20.endian0.i586.rpm glibc-headers-2.3.4-2.41.endian8.i386.rpm glibc-extras-2.3.4-2.41.endian8.i386.rpm glibc-devel-2.3.4-2.41.endian8.i386.rpm libgomp-4.1.2-14.endian1.i586.rpm gcc4-4.1.2-14.endian1.i586.rpm make-3.81-3.endian0.i586.rpm cpp-3.4.6-10.endian8.i586.rpm autoconf-2.59-7.endian0.noarch.rpm automake-1.9.5-0.endian0.noarch.rpm m4-1.4.3-0.endian0.i386.rpm libstdc++-devel-3.4.6-10.endian8.i586.rpm --nodeps
Preparing... ########################################### [100%]
1:m4 ########################################### [ 7%]
2:libgomp ########################################### [ 14%]
3:glibc-extras ########################################### [ 21%]
4:binutils ########################################### [ 29%]
5:autoconf ########################################### [ 36%]
6:glibc-kernheaders ########################################### [ 43%]
7:libstdc++-devel ########################################### [ 50%]
8:cpp ########################################### [ 57%]
9:make ########################################### [ 64%]
10:patch ########################################### [ 71%]
11:glibc-headers ########################################### [ 79%]
12:automake ########################################### [ 86%]
13:glibc-devel ########################################### [ 93%]
14:gcc4 ########################################### [100%]---
*** continuando... ***
root@firewall-01:~/temp/et131x-1.2.3-3 # make
#@make -C /lib/modules/2.6.32.25-57.e40.i586/build M=/root/temp/et131x-1.2.3-3 modules
make: *** /lib/modules/2.6.32.25-57.e40.i586/build: No such file or directory. Stop.
make: *** [modules] Error 2---
root@firewall-01:/lib/modules/2.6.32.25-57.e40.i586 # pwd
/lib/modules/2.6.32.25-57.e40.i586
root@firewall-01:/lib/modules/2.6.32.25-57.e40.i586 # ls -l
total 884
lrwxrwxrwx 1 root root 46 Nov 24 11:38 build -> ../../../usr/src/kernels/2.6.32.25-57.e40.i586
drwxr-xr-x 2 root root 4096 Nov 24 11:39 extra
drwxr-xr-x 9 root root 4096 Nov 11 14:14 kernel
-rw-r--r-- 1 root root 179057 Nov 24 11:49 modules.alias
-rw-r--r-- 1 root root 1495 Nov 11 13:20 modules.block
-rw-r--r-- 1 root root 69 Nov 24 11:49 modules.ccwmap
-rw-r--r-- 1 root root 144259 Nov 24 11:49 modules.dep
-rw-r--r-- 1 root root 0 Nov 11 13:20 modules.drm
-rw-r--r-- 1 root root 73 Nov 24 11:49 modules.ieee1394map
-rw-r--r-- 1 root root 141 Nov 24 11:49 modules.inputmap
-rw-r--r-- 1 root root 774 Nov 24 11:49 modules.isapnpmap
-rw-r--r-- 1 root root 0 Nov 11 13:20 modules.modesetting
-rw-r--r-- 1 root root 1368 Nov 11 13:20 modules.networking
-rw-r--r-- 1 root root 74 Nov 24 11:49 modules.ofmap
-rw-r--r-- 1 root root 34812 Nov 11 13:19 modules.order
-rw-r--r-- 1 root root 184374 Nov 24 11:49 modules.pcimap
-rw-r--r-- 1 root root 43 Nov 24 11:49 modules.seriomap
-rw-r--r-- 1 root root 82971 Nov 24 11:49 modules.symbols
-rw-r--r-- 1 root root 193135 Nov 24 11:49 modules.usbmap
lrwxrwxrwx 1 root root 5 Nov 24 11:38 source -> build
drwxr-xr-x 2 root root 4096 Nov 11 13:20 updates
drwxr-xr-x 2 root root 4096 Nov 24 11:38 vdso---
Tens alguma idéia de como conseguir compilar o driver?
[]'s
moso
Membro
Olá skate_forever!
Podes me mandar por email o et131x.ko.gz que você gerou no Endian 2.4 para eu testar se funciona direto no Endian 2.4.1?
O endereço é moso at oi.com.br
Instalei um Ubuntu 10.04.1 Server e peguei o et131x.ko para ver se funcionava no Endian 2.4.1 mas não rolou...
Deu a seguinte mensagem:
root@firewall-01:~ # insmod et131x.ko
insmod: error inserting 'et131x.ko': -1 Invalid module formatNo /var/log/messages apareceu:
Nov 24 19:04:05 firewall-01 kernel: [ 8403.011615] et131x: disagrees about version of symbol module_layout
[]'s
Caso você tenha realizado uma atualização e tenha apresentado problemas. Reinstale a versão 2.4.0 e não faça nenhuma atualização e realize os passos abaixo.
Faça o download dos pacotes chkconfig-1.3.11.2-1.i586.rpm initscripts-2.4.2-0.endian12.i586.rpm ipac-ng-1.33-2.endian7.i586.rpm iptables-1.4.8-1.endian16.i586.rpm, no site, http://updates.endian.org/stable/pool/ coloque seu e-mail e a senha community.
Depois execute os comandos a seguir:
# cd pacotes
# rpm -Uvh chkconfig-1.3.11.2-1.i586.rpm initscripts-2.4.2-0.endian12.i586.rpm ipac-ng-1.33-2.endian7.i586.rpm iptables-1.4.8-1.endian16.i586.rpm
# reboot
# cd EFW-COMMUNITY-2.4-201006071652/RPMS/
# rpm -e --nodeps kernel kernel-modem-drivers-2.4-15_2.6.27.19_72.e25.i586 kernel-module-openswan-2.6.24-4.endian9_2.6.27.19_72.e25.i586 kernel-module-r8168-8.016.00-3.endian4_2.6.27.19_72.e25.i586
# rpm -Uvh kernel-PAE-2.6.27.19-72.e25.i686.rpm kernel-PAE-devel-2.6.27.19-72.e25.i686.rpm kernel-modem-drivers-PAE-2.4-15_2.6.27.19_72.e25.i586.rpm kernel-module-openswan-PAE-2.6.24-4.endian9_2.6.27.19_72.e25.i586.rpm kernel-module-r8168-PAE-8.016.00-3.endian4_2.6.27.19_72.e25.i586.rpm
# rebootTenta isso ai
Aproveite e baixe o ulogd-2.0.0-0.endian9.i586.rpm e atualize.
aureliomaica
Membro
Olá "skate_forever" também preciso fazer funcionar o endian com mais de 4gb de ram ...estou seguindo suas dicas, mas quando executo o comando:
"efw-upgrade -s"
Please choose the appropriate channel for your environment and hit [ENTER]:
1) Production (stable releases)
2) Development (bleeding edge)
1
dá o seguinte erro :
error: Failed acquiring release file for 'efw-community':
error: http://aureliomaica%40gmail.com:community@updates.endian.org/stable/repodata/repomd.xml: File not found
podeeria me dar uma dica?
aureliomaica
Membro
Ola...obrigado pelas informações, agora conssegui me registrar no endian community...e estou tentando instalar o kernel-PAE para reconhecer mais memória ram, aí acontece o seguinte erro:
root@firewall:~ # smart install kernel-PAE
Loading cache...
Updating cache... ######################################## [100%]
error: 'kernel-PAE' matches no packages. Suggestions:
error: kernel-3:2.6.32.25-57.e40@i586
Você deve fazer login para publicar.