- Este tópico contém 14 respostas, 5 vozes e foi atualizado pela última vez 14 anos, 5 meses atrás por
.
-
Posts
-
-
Olá pessoal,
Não estou conseguindo fazer a instalação da ferramenta vmware-tools no Endian 2.4.1.
Me retorna a mensagem no final da instalação:
Before you can compile modules, you need to have the following installed…
make
gcc
kernel headers of the running kernel
Searching for GCC…
The path “” is not valid path to the gcc binary.
Would you like to change it? [yes]
Alguém poderia me auxiliar nesta instalação?
Agradeço pelo auxílio.
Levi Garcia
🚀 Apresentando o Hotspot Beacon! 🚀
Desbloqueie o potencial do seu Wi-Fi com o Hotspot Beacon. Personalize sua página de acesso para mostrar anúncios, promoções ou informações e engajar seus clientes, impulsionando o seu negócio.
💡 Principais Funcionalidades:
- Interface amigável e intuitiva
- Opções de personalização completas para sua marca
- Gerenciamento de propagandas e promoções
- Integração fácil com sistemas existentes via API
- Limitação de velocidade ou largura de banda por usuário
- Controle de acesso por horário
🔗 Confira o site para saber mais: https://hotspotbeacon.com -
-
-
-
-
-
-
Buenas, acabei de instalar, precisei instalar os pacotes contidos no DEVEL do Endian:
Descompacta, instala todos os rpms contidos no diretório RPMS/devel/ e corre pro abraço.
-
mvldebian,
Desculpa, mas a pasta que vc diz para instalar é a DEVEL_RPMS/ certo?
Porém, qdo tento instalar os pacotes ele me pede dependência para os pacotes:
root@otz-srv01:~/DEVEL_RPMS # rpm -Uvh *
error: Failed dependencies:
libtool is needed by build-essential-0.4-endian3.i586
ncurses-devel is needed by build-essential-0.4-endian3.i586
libselinux-devel is needed by build-essential-0.4-endian3.i586
glibc-headers is needed by build-essential-0.4-endian3.i586
kernel-devel is needed by build-essential-0.4-endian3.i586
kernel-smp-devel is needed by build-essential-0.4-endian3.i586
rpm-build is needed by build-essential-0.4-endian3.i586
procinfo is needed by build-essential-0.4-endian3.i586
busybox is needed by build-essential-0.4-endian3.i586
newt-devel is needed by build-essential-0.4-endian3.i586
libsmooth is needed by build-essential-0.4-endian3.i586
kernel-PAE-devel is needed by build-essential-0.4-endian3.i586
zlib-devel is needed by build-essential-0.4-endian3.i586
glibc-devel >= 2.2.90-12 is needed by gcc-3.4.6-10.endian8.i586
glibc-devel >= 2.2.90-12 is needed by gcc4-4.1.2-14.endian1.i586
Tem como vc detalhar um pouco melhor a instalação desses pacotes?
Muito obrigado e desculpa pelo tormento! 😛
Levi
-
Segue o link abaixo sobre a vm Tools
http://andrew-stephanie.ca/endian-firewall-23-extra-utilities
-
Segue a solução;
Install VMware Tools in a Linux Guest
Before you begin, make sure the virtual machine is powered on and the guest operating system is running.
To install VMware Tools in a Linux guest
1
On the host, select VM > Install VMware Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools. If the current version is installed, the menu item is Reinstall VMware Tools.
2
On the guest, log in as root.
3
If your Linux distribution does not automatically mount CD-ROMs, mount the VMware Tools virtual CD-ROM image.
a
If necessary, create the /mnt/cdrom directory:
mkdir /mnt/cdrom
b
Mount the CD-ROM drive.
Some Linux distributions use different device names or organize the /dev directory differently. If your CD-ROM drive is not /dev/cdrom or if the mount point for a CD-ROM is not /mnt/cdrom, modify the command to reflect the conventions used by your distribution.
mount /dev/cdrom /mnt/cdrom
4
Change to a working directory (for example, /tmp):
cd /tmp
5
If a previous installation exists, delete the previous vmware-tools-distrib directory.
The location of this directory depends on where you placed it during the previous installation. Often it is placed in /tmp/vmware-tools-distrib.
6
Uncompress the installer:
tar zxpf /mnt/cdrom/VMwareTools-<x.x.x>-<yyyy>.tar.gz
The value <x.x.x> is the product version number and <yyyy> is the build number of the product release.
7
If necessary, unmount the CD-ROM image.
If your Linux distribution automatically mounted the CD-ROM, you do not need to unmount the image.
umount /dev/cdrom
8
Run the VMware Tools installer.
cd vmware-tools-distrib
./vmware-install.pl
Respond to the questions the command-line wizard displays on the screen. Press Enter to accept the default value. The configuration file, vmware-config-tools.pl, runs after the installer file finishes running.
9
If you are updating VMware Tools, reboot the virtual machine or manually reload the pvscsi, vmxnet, and vmxnet3 Linux kernel modules.
If you reload the modules, networking on the virtual machine is interrupted.
10
Enter the following commands to restore the network:
/etc/init.d/network stop
rmmod vmxnet
modprobe vmxnet
/etc/init.d/network start
11
Log out of the root account.
exit
12
(Optional) Start your graphical environment.
13
In an X terminal, to start the VMware User process, enter the following command:
vmware-user
-
Adriano, vc seguiu esse tutorial para ver se ele funciona?
O meu problema é o seguinte, quando começo a fazer a instalação do vmwaretools, ele não compila um novo kernel com os módulos adicionados, pois eu não tenho a biblioteca gcc e nem o kernel-headers instalados. Ou seja, eu até instalo dessa maneira que você descreveu, porém, quando rebootar a VM, a mesma não vai carregar novamente os módulos e precisarei efetuar NOVAMENTE o processo.
mvldebian, vc poderia responder minha pergunta?!
Agradeço pelos auxílios e pelas tentativas.
[]’s
-
-
-
-
- O tópico ‘Instalação VMware-tools no Endian 2.4.1’ está fechado para novas respostas.